You are here: Balver Zinn Englisch Pfeil Alloys Pfeil Solder wires Pfeil LF 3135 NC

Balver Zinn solder wire LF3135NC

BALVER ZINN SOLDER WIRE LF3135 NC is a new development for lead-free soldering applications, when activators containing halide are allowed. BALVER ZINN SOLDER WIRE LF3135 NC allows optimal soldering results with low flux contents. The standard flux content is 2.2 %. BALVER ZINN SOLDER WIRE LF3135 NC is a no-clean formulation, despite its content of halides and can be used for difficult soldering applications without cleaning. Typical applications for LF3135 NC include manual soldering, automatic soldering and rework. LF3135 NC is offered in diameters from 0.3 mm to 3.5 mm and is available in lead-free alloys SN100C, SN96C and SN97C. Lead-containing wires or special alloys are available on request. SN96C and SN97C are in accordance to J-STD-006B! For additional information please refer to the product data sheet.

Physical and chemical properties

Acid value:
J-STD-004; IPC-TM-650, Method 2.3.13; 06/04 A
195 mg KOH/g ± 5%
Copper mirror test:
J-STD-004; IPC-TM-650, Method 2.3.32; 06/04 D
M
Silver chromate test:
J-STD-004; IPC-TM-650, Method 2.3.33; 06/04 D
not passed
Solid content, flux:
J-STD-004; IPC-TM-650, Method 2.3.34; 06/04 C
n.d.
Bromide und Chloride Test:
J-STD-004; IPC-TM-650, Method 2.3.35; 06/04 C
1,00 % ± 0,2
Fluoride after spot test:
J-STD-004; IPC-TM-650, Method 2.3.35.1; 06/04 A
passed
Insulation resistance:
J-STD-004; IPC-TM-650, Method 2.6.3.3; 06/04 B
> 1x10 Exp.8 Ohm
Corrosion test:
J-STD-004; IPC-TM-650, Method 2.6.15; 06/04 C
passed

Delivery sizes

Parameter Standard
Wire diameter (mm) 0,3 /0,5 / 0,8 / 1,0 / 1,5 / 2,0 / 2,5 / 3,0 / 3,5
Flux content (weight-%) 2,2

Other diameters, flux contents and features on request.

Reels

Weight 0,25 / 0,4 kg 0,5 / 1,0 kg 0,4 / 0,8 kg
Marking 63/37 BZ K80
Height 63 mm 80 mm 80 mm
Outside diameter 63 mm 76 mm 80 mm
Inside diameter 11 mm 30 mm 16 mm
Reels./carton 10 10 10