Balver Zinn solder wire Brilliant 211
BALVER ZINN presents a new lead free cored solder wire: The Brilliant – series. BALVER ZINN SOLDER WIRE Brilliant 211 is a halide-free No-Clean formulation especially suitable for rework and touch-up applications. BALVER ZINN BRILLIANT 211 exhibits a low level of bright and clear residues. These are non-corrosive and may remain on the board without cleaning. BALVER ZINN BRILLIANT 211 shows very good wetting and flow ability. BRILLIANT 211 has an excellent spread and in combination with SN100CS the lowest oxidation during soldering process. BALVER ZINN BRILLIANT 211 is a No-Clean formulation; the standard flux content is 2.2 %. BALVER ZINN BRILLIANT 211 is available in diameters from 0.3mm to 3.5mm. BALVER ZINN BRILLIANT 211 is available in lead-free alloys SN100C, SN96C and SN97C. For additional information please refer to the product data sheet.
Physical and chemical properties
| Acid value: J-STD-004; IPC-TM-650, Method 2.3.13; 06/04 A |
226,1 mg KOH/g ± 5% |
| Copper mirror test: J-STD-004; IPC-TM-650, Method 2.3.32; 06/04 D |
L |
| Silver chromate test: J-STD-004; IPC-TM-650, Method 2.3.33; 06/04 D |
passed |
| Solid content, flux: J-STD-004; IPC-TM-650, Method 2.3.34; 06/04 C |
n.d. |
| Bromide und Chloride Test: J-STD-004; IPC-TM-650, Method 2.3.35; 06/04 C |
n.d. |
| Fluoride after spot test: J-STD-004; IPC-TM-650, Method 2.3.35.1; 06/04 A |
passed |
| Insulation resistance: J-STD-004; IPC-TM-650, Method 2.6.3.3; 06/04 B |
n.d. |
| Corrosion test: J-STD-004; IPC-TM-650, Method 2.6.15; 06/04 C |
passed |
Delivery sizes
| Parameter | Standard |
|---|---|
| Wire diameter (mm) | 0,3 /0,5 / 0,8 / 1,0 / 1,5 / 2,0 / 2,5 / 3,0 / 3,5 |
| Flux content (weight-%) |
2,2 |
Other diameters, flux contents and features on request.
Reels
| Weight | 0,25 / 0,4 kg | 0,5 / 1,0 kg | 0,4 / 0,8 kg |
| Marking | 63/37 | BZ | K80 |
| Height | 63 mm | 80 mm | 80 mm |
| Outside diameter | 63 mm | 76 mm | 80 mm |
| Inside diameter | 11 mm | 30 mm | 16 mm |
| Reels./carton | 10 | 10 | 10 |
