You are here: Balver Zinn Englisch Pfeil Alloys Pfeil Solder wires Pfeil Brilliant B2012

Balver Zinn solder wire Brilliant B2012

BALVER ZINN presents a new lead free cored solder wire: The Brilliant – series. BALVER ZINN SOLDER WIRE Brilliant B2012 is a halide-free No-Clean formulation ideal for rework and touch-up applications.

BALVER ZINN BRILLIANT B2012 exhibits a low level of bright and clear residues. These are non-corrosive and may remain on the board without cleaning. BALVER ZINN BRILLIANT B2012 shows very good wetting and flow ability. BRILLIANT B2012 has an excellent spread and in combination with SN100C the lowest oxidation during soldering process.

BALVER ZINN BRILLIANT B2012 wire is a No-Clean formulation available in the lead-free alloys SN100C, SAC305 (SN97C) and SAC387 (SN96C) in various diameters from 0,3mm to 2,5mm with a standard flux content of 2,2%. For additional information please refer to the product data sheet.

Information

Physical and chemical properties

Acid value:
J-STD-004; IPC-TM-650, Method 2.3.13; 06/04 A
220 mg KOH/g ± 5%
Copper mirror test:
J-STD-004; IPC-TM-650, Method 2.3.32; 06/04 D
L
Silver chromate test:
J-STD-004; IPC-TM-650, Method 2.3.33; 06/04 D
Pass
Solid content, flux:
J-STD-004; IPC-TM-650, Method 2.3.34; 06/04 C
Not applicable
Bromide und Chloride Test:
J-STD-004; IPC-TM-650, Method 2.3.35; 06/04 C
Not applicable
Fluoride after spot test:
J-STD-004; IPC-TM-650, Method 2.3.35.1; 06/04 A
Pass
Insulation resistance:
J-STD-004; IPC-TM-650, Method 2.6.3.3; 06/04 B
Not applicable
Corrosion test:
J-STD-004; IPC-TM-650, Method 2.6.15; 06/04 C
Pass

Delivery sizes

Parameter Standard
Wire diameter (mm) 0,3 /0,5 / 0,8 / 1,0 / 1,5 / 2,0 / 2,5 / 3,0 / 3,5
Flux content
(weight-%)
2,2

Other diameters, flux contents and features on request.

Reels

Weight 0,25 / 0,4 kg 0,5 / 1,0 kg 0,4 / 0,8 kg
Marking 63/37 BZ K80
Height 63 mm 80 mm 80 mm
Outside diameter 63 mm 76 mm 80 mm
Inside diameter 11 mm 30 mm 16 mm
Reels./carton 10 10 10