SN100C - Safety Data Sheets

Safety Data Sheet acc. to 1907/2006/EC, Article 31

For Material Safety Data Sheets (MSDS) please contact our staff.

Identification of substance

• Trade name: SN100C, SN100CL, SN100CLe, SN100Ce, SN100C4, SN100C3
• Application of the substance / the preparation: Solder alloys
• Manufacturer / Supplier:
  Balver Zinn Josef Jost GmbH & Co.KG
  Blintroper Weg 11, D-58802 Balve, Germany
  Phone: +49 2375 915 – 0, Fax: +49 2375 915 – 114
• E-mail address of the competent person responsible for the Safety Data Sheet: info@csb-online.de
  
• Informing department: Sales / Technics
  
• Emergency information: LB-Gift Berlin Phone: +49 (0) 30 / 19240

Hazards identification

• Hazard designation: void
• Information pertaining to particular dangers for man and environment: void
• Classification system: The product does not have to be labeled due to the calculation procedure of the "General Classification guideline for preparations of the EU" in the latest valid version.

Composition/information on ingredients

• Chemical characterization
• Description: Mixture of the substances listed below with harmless products.

Dangerous components:
CAS: 7440-31-5 EINECS: 231-141-8	Tin		50 - 100%
CAS: 7440-50-8 EINECS: 231-159-6	Copper		< 5%
CAS: 7440-02-0 EINECS: 231-111-4 Index Number: 028-002-00-7	Nickel	Xn, Xi; R 40-43	< 0,1%

• Additional information: For the wording of the listed risk phrases refer to section 16.

First aid measures

• General information: Measures are only required if dusts, vapors or fumes are formed during use.
• After inhalation: Supply fresh air; consult doctor in case of symptoms.
  If dust or other particles are generated during processing, it is necessary to provide adequate ventilation and/or respiration protection. If dust/particles have been respirated call physician.
• After skin contact: The product is not skin irritating. Wash with soap and water.
• After eye contact: Unlikely route of exposure
• After swallowing: Unlikely route of exposure

Fire fighting measures

• Suitable extinguishing agents: Special powder for metal fires. Do not use water.
• Special hazards caused by the material, its products of combustion or flue gases: Harmful metal oxide smoke
• Protective equipment: Wear self-contained breathing apparatus.
• Additional information: Collect contaminated fire fighting water separately. It must not enter drains.

Accidental release measures

• Person-related safety precautions: Not required.
• Measures for environmental protection: No special measures required.
• Measures for cleaning/collecting:
  • Collect mechanically.
  • Send for recovery or disposal in suitable containers.
  • Dispose of the material collected according to regulations.

Handling and storage

Handling

• Information for safe handling:
  • Ensure good ventilation/exhaustion at the workplace.
  • If dust/smoke is developed, avoid breathing dust/smoke.
  • Make sure that all applicable workplace limits are observed.
• Information about protection against explosions and fires: No special measures required.

Storage

• Requirements to be met by storerooms and containers: Observe all local and national regulations for storage of water-polluting products.
• Information about storage in one common storage facility: Not required
• Further information about storage conditions: None

Exposure controls and personal protection

• Additional information about design of technical systems: No further data; see item 7.
• Components with critical values that require monitoring at the workplace:
  • Observe all workplace limits for dust:
  • OEL total dust: 10 mg/m³
  • OEL respirable dust: 3 mg/m³

• 7440-50-8 Copper:
• WEL (Great Britain)
  Short-term value: 2** mg/m³
  Long-term value: 0.2* 1** mg/m³
  *fume **dusts and mists (as Cu)
• 7440-02-0 Nickel:
• WEL (Great Britain)
  Long-term value: 0.5 mg/m³
  as Ni

• Additional information: The lists that were valid during the compilation were used as basis.

Personal protective equipment:

• General protective and hygienic measures:
  • Keep away from foodstuffs, beverages and food.
  • Do not breathe vapors.
  • Wash hands during breaks and at the end of the work.
  • Use skin protection cream for preventive skin protection.
• Breathing equipment:
  • Breathing equipment necessary if dusts or fumes are formed.
  • If all workplace limits are observed and good ventilation is ensured, no special precautions necessary.
• Protection of hands: Heat resistant gloves
  
• Material of gloves
  • Carry heat insulating gloves by rough soldering work.
  • The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
  • As the product is a preparation of several substances, the resistance of the glove material cannot be calculated in advance and, therefore, must be checked prior to the application.
• Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
• Eye protection: Safety glasses recommended during soldering work.
• Body protection: Wear heat-resistant protective clothing when handling hot/molten product.

Physical and chemical properties

• General Information:
  
  • Form: solid in various forms
  • Color: according to product specification
  • Smell: odorless
• Change in condition:
  
  • Melting point/Melting range: For data of a specific product please refer to technical data sheet.
  • Boiling point/Boiling range: not determined
• Flash point: not applicable
• Self-inflammability: Product is not self-igniting.
• Danger of explosion: Product is not self-igniting.
• Density: For data of a specific product please refer to technical data sheet.
• Solubility in / Miscibility with Water insoluble
• Additional information:
  Further information please refer to technical data sheet.

Stability and reactivity

• Thermal decomposition / conditions to be avoided:
  No decomposition if used according to specifications.
• Materials to be avoided: none
• Dangerous reactions: No dangerous reactions known.
• Dangerous products of decomposition:
  Toxic or harmful metal oxides

Toxicological information

Acute toxicity:

• Primary irritant effect:
• on the skin: No irritant effect
• on the eye: No irritant effect
• Sensitization: Contains a sensitizing substance. May produce an allergic reaction.
• Additional toxicological information: When used and handled according to specifications, the product does not have any harmful effects according to our experience and the information provided to us.

Ecological information:

Additional ecological information:

• According to the recipe, it contains the following heavy metals and compounds according to EC guideline NO. 76/464 EC:
  • 50 - 100% Sn
  • < 5% Cu
  • > 0,1% Ni
• General notes: Water hazard class 1 (Self-assessment): slightly hazardous for water

Disposal considerations

Product:

• Recommendation: Disposal must be made according to official regulations. Contact manufacturer for recycling information.
• European waste catalog: Waste disposal key numbers from EWC have to be assigned depending on origin and processing.

Uncleaned packaging:

• Recommendation: Disposal must be made according to official regulations. Contact manufacturer for recycling information.

Transport information

Land transport ADR/RID (cross-border):

• ADR/RID Class:-

Maritime transport IMDG/GGVSea:

• IMDG/GGVSea Class: -

Air transport ICAO-TI and IATA-DGR:

• ICAO/IATA Class: -

• Transport/Additional information: Not dangerous according to the above specifications.

Regulatory information

• Designation according to EC guidelines:
  The product is not subject to classification according to the calculation methods of the "General Classification Guideline for Preparations of the EC" as issued in the last version.

National regulations

• Decree to be applied in case of technical fault: -
• Water hazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water

Other information:

These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.

• Reasons for changes: The Material Safety Data Sheet has been revised. Changes in the respective chapters are characterized in the left side edge by*.
• Relevant R-phrases:
  
  • The(se) R-phrase(s) are those of the ingredient(s) and do(es) NOT represent the classification of the preparation.
  • 40 Limited evidence of a carcinogenic effect.
  • 43 May cause sensitization by skin contact.
• Department issuing MSDS:
  C.S.B. GmbH
  Oberstraße 10
  D-47829 Krefeld
  Phone: 02151 / 652086-0
  Fax: 02151 / 652086-9
• * Data compared to the previous version altered.