You are here: Balver Zinn Englisch Pfeil Alloys Pfeil Solder wires Pfeil µ-wire B2012

Balver Zinn µ-wire Brilliant B2012

Balver Zinn presents the μ-wire product family with diameters below 0,3mm! Balver Zinn μ-wire SN100C B2012 is a halide free, rosin based formulation and available in diameter 0.15 and 0.2mm. Balver Zinn μ-wire SN100C B2012 is based on the Brilliant B2012 flux technology and leaves clear residue and shinny solder joints. μ-wire SN100C B2012 gives fast and sustained wetting with low smoke and odour. The flux residues of μ-wire SN100C B2012 are non-corrosive and may remain on the board witout cleaning.

Balver Zinn μ-wire SN100C B2012 is a no-clean flux cored solder wire with a standard flux content of 2.2%.

Physical and chemical properties

Acid value:
J-STD-004; IPC-TM-650, Method 2.3.13; 06/04 A
220 mg KOH/g ± 5%
Copper mirror test:
J-STD-004; IPC-TM-650, Method 2.3.32; 06/04 D
L
Silver chromate test:
J-STD-004; IPC-TM-650, Method 2.3.33; 06/04 D
Pass
Solid content, flux:
J-STD-004; IPC-TM-650, Method 2.3.34; 06/04 C
Not applicable
Bromide und Chloride Test:
J-STD-004; IPC-TM-650, Method 2.3.35; 06/04 C
Not applicable
Fluoride after spot test:
J-STD-004; IPC-TM-650, Method 2.3.35.1; 06/04 A
Pass
Insulation resistance:
J-STD-004; IPC-TM-650, Method 2.6.3.3; 06/04 B
Not applicable
Corrosion test:
J-STD-004; IPC-TM-650, Method 2.6.15; 06/04 C
Pass

Delivery sizes

Parameter Standard
Wire diameter (mm) 0,15 /0,2
Flux content
(weight-%)
2,2

Other diameters, flux contents and features on request.

Reels

Weight 1 gram / ca. 10 m 10 gram / ca. 100 m
Marking BZ BZ
Reels./carton 1 piece or 4 pieces 1 piece or 4 pieced